Tricopter 1


Parts used:

MultiWii Pro board with GPS module:

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=26588&aff=655899

Motors:

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=6247&aff=655899

ESC’s:

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=13429&aff=655899

Battery:

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=14057&aff=655899

Yaw Servo:

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=10346&aff=655899

Yaw mechanism:

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=8432&aff=655899

Wires:

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=9681&aff=655899

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=9680&aff=655899

ESC flash tool: (You need both)

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=21321&aff=655899

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=27195&aff=655899

Propellers:

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=22450&aff=655899

or

http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=22446&aff=655899

Frame:
10mm*13mm*500mm arms. You need three 50cm long booms, which is 10*13 mm’s thick. Bought at local hardware store.
2,5 mm plywood for the two middle plates.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s