So today i went out to a hardware store to buy some nylon bolts that i am going to use for mounting the KK board and the power distribution board. I found a plastic tube that i will use as “spacers” so i can get them separated and thereby decreasing interferences.
So this is the plastic tubing which has a inside diameter of 5 mm. The Nylon bolts also got a diameter of 5 mm. It should be a perfect fit. But we will see later on.
Here is a closer look on the nylon bolts. they are 20 mm long and got a diameter of 5 mm.
Here is the nuts and also with an inner diameter of 5 mm.
Hopefully the rest of the parts should arrive tomorrow or the after tomorrow.
Thats all for now. See you soon and be sure to check back and follow us on Facebook!